Glue for the road stud (10kg bucket)

Glue for fixing road reflectors in asphalt or concrete. 10 kg bucket. Made on the basis of modified polymers. The glue is particularly resistant to changing weather conditions. Perfect for both asphalt and concrete surfaces. With one bucket (10kg), depending on the roughness of the base and the size of the reflector, approximately 30-40 reflectors can be attached. The substrate must be cleaned of any dirt, etc. Do not apply glue on a wet surface, the surface must be dried. Application temperature: should not be used at a temperature lower than 5 degrees, and if necessary, the surface should be heated to +10 degrees. The heated glue should be poured in a pointwise direction into the prepared holes (drills) and immediately press the reflector into the glue mass.