Marking machine U13 (Turbo diesel engine) [CM]

U13 four-wheel tracing machines equipped for airless and airspray paint, cold spray plastic, thick cold plastic.The machine can be equipped for: COLD-AIRSPRAY PAINT, COLD-AIRLESS PAINT, COLD SPRAY-AIRLESS PLASTIC 1:1 RATIO, COLD SPRAY-AIRLESS, PLASTIC 98:2 RATIO EXTERNAL MIXING (ONLINE), COLD PLASTIC HIGH-THICKNESS-SHOE SYSTEM, COMBINED AIRLESS COLD PAINT + COLD PLASTIC HIGH THICKNESS SHOE SYSTEM. Dimensions 4600x1280xh2200mm. STANDARD CONFIGURATION: TURBO diesel engine: 74 HP. Hydraulic drive with 2 motors and gear units with DRUM. BRAKES integrated on rear wheels. Pressurized glass bead tank 280l (max pressure 0,5 bar). Screw compressor 1987l/min. Electronic spacing device. Steering on front wheels. Closable platform for cones. Telescopic pointer with pneumatic lift. Seats and console unit sliding (left/right) up to above marking unit. Steering-wheel with adjustable inclination, mounted on sliding support for following driver position. Sunshade roof. TECHNOLOGY TANK: COLD PAINT - AIRSPRAY - 1 pressurized tank for paint 500l or 2 pressurized tanks for paint 250l. COLD PAINT - AIRLESS 1 tank for paint max 800l. COLD SPRAY PLASTIC – AIRLESS RATIO 1:1 2 tanks for plastic 300l. COLD SPRAY PLASTIC – AIRLESS RATIO 98:2 EXTERNAL MIXING (ONLINE) 1 tank for plastic 500l. COLD PLASTIC HIGH THICKNESS – SHOE SYSTEM 1 pressurized tank for plastic 500l. COMBINED COLD PAINT AIRLESS + COLD PLASTIC HIGH. THICKNESS SHOE SYSTEM 1 tank for paint 300l + 1 pressurized tank for plastic 250l. The photo does not represent the standard version.