Airless road marking machine AR300-2C on 4 wheels (high performance, 2 pistoles; turbo diesel engine) [CM]

Airless road marking machine AR300-2C. Turbo diesel engine (44HP). Liquid cooling. Manned, 4-wheel, high performance, precision and stability. To use 2 colours at the same time, apply plastic spray 2 components, airports. IDEAL FOR: jobs requiring a large paint tank capacity, high performance, the precision and stability of a four-wheel machine with a seated operator. For airport work. For use 2 colours simultaneously or to apply plastic spraying 2 components, 1:1 ratio, external mixing or, with appropriate options, internal mixing. APPLICATION OF PAINT: single-component non-refractive (=without pre-mixed glass beads) solvent-based or water-based, specifically formulated for airless. 2 paint tanks: capacity 2x150l, made of stainless steel, with hydraulic stirrer. Solvent tank for flushing of guns and paint hoses. Pressurized glass bead tank, capacity 100l. With regulator of pressure and moisture separator. 2 airless hydraulic piston pumps: max. vol. flow 2 x 12,5l/min. Compressor: flow air rate 827l/min. 2 automatic paint guns mounted on fixed L support (with adjustable height). Standard nozzles for 10-20cm line. (line width can be ranged from 10 cm to 30cm by changing nozzle and adjusting gun height). Fixed support can be replaced with pneumatic support. Guns can be used for 2 colours or for 2 component Cold Spray Plastic, 1:1, external mixing 2 high-pressure paint filters. 2 automatic glass bead guns. Diffuser with adjustable slope and adjustable opening angles. Closing delay regulator for bead gun. MAX. LINE WIDTH: 90 cm (achievable only with proper optional equipment). Electronic spacing device. TURBO diesel engine - power 44 HP, liquid cooling. Lights and LED beacon. Warning board with arrow for left/right car overtaking and 2 flashing. Hydraulic drive with: 2 motors directly coupled on rear wheels, hydraulic negative brakes, control for forward, reverse and neutral gear with engagement of negative brakes, variable-flow pump. Hydraulic oil cooler. Steering on front wheels. Steering diameter 7,35m. Seat with adjustable position (left/right; forward/back). Sunshade roof. Dimensions: 3450x1110x2100mm. Weight: 1300kg. In addition, it is possible to purchase additional equipment. Photos don't represent the standard version of line striper.