Airless road marking machine AR500 on 4 wheels (high performance; turbo diesel engine) [CM]

Airless road marking machine AR300. Turbo diesel engine (44HP). Liquid cooling. High performance, precision and stability. To make 2 strips at the same time with post-spraying of beads, to make 90 cm strips with one pass, for airports. IDEAL FOR: jobs requiring a large paint tank capacity, high performance, the precision and stability of a compact four-wheel machine with a seated operator. With the appropriate options, ideal for making 2 strips at the same time with post-spraying of beads, for making 90 cm strips with one pass, for airports. APPLICATION OF PAINT: Non-refractive single-component (=without pre-mixed glass beads) solvent- or water-based, specifically formulated for airless. Paint tank: capacity 300l, made of stainless steel, with hydraulic stirrer. Solvent tank for flushing of gun and paint hose. Pressurized glass bead tank, capacity 170l. With regulator of pressure and moisture separator. Airless hydraulic piston pump: max. vol. flow 12,5 l/min. Compressor: flow air rate 827 l/min. Automatic paint gun mounted on fixed L support (with adjustable height). Standard nozzle for 10-20 cm line. (Line width can be ranged from 10 cm to 30 cm by changing nozzle and adjusting gun height. Fixed support can be replaced with pneumatic support. High-pressure paint filter. Automatic glass bead gun. Diffuser with adjustable slope and adjustable opening angles. Closing delay regulator for bead gun. MAX. LINE WIDTH: 90 cm (achievable only with proper optional equipment). Electronic spacing device. Lights and LED beacon. Warning board with arrow for left/right car overtaking and 2 flashing. Hydraulic drive with: 2 motors directly coupled on rear wheels - hydraulic negative brakes, control for forward, reverse and neutral gear with engagement of negative brakes, variable-flow pump. Hydraulic oil cooler. Steering on front wheels. Steering diameter 7,35 m (AR300). Seat with adjustable position (left/right; forward/back). Sunshade roof. Dimensions: 3350x1100x2100mm. Weight: 1800kg. In addition, it is possible to purchase additional equipment. Photos don't represent the standard version of line striper.