Airless road marking machine AR300SN on 4 wheels (high performance; turbo diesel engine) [CM]

Airless road marking machine AR300SN. Turbo diesel engine (44HP). Liquid cooling. Articulated marking machine, four-wheel drive, high performance, precision and stability. Steering on the centre pivot for easy turning of very tight bends, optimal for road marking on roads with hairpin bends. IDEAL FOR: jobs requiring a large paint tank capacity, high performance, and the precision and stability of a compact four-wheel machine with a seated operator. For operators who prefer the central steering, for making tighter turns. With the appropriate options, ideal for making 2 strips at the same time with post-spraying of beads, to make 90 cm strips in one pass. APPLICATION OF PAINT: Non-refractive single-component (=without pre-mixed glass beads) solvent- or water-based, specifically formulated for airless. Paint tank: capacity 300l, made of stainless steel, with hydraulic stirrer. Solvent tank for flushing of gun and paint hose. Pressurized glass bead tank, capacity 100 l. With regulator of pressure and moisture separator. Airless hydraulic piston pump: max. vol. flow 12,5l/min. Compressor: flow air rate 827 l/min. Automatic paint gun mounted on fixed L support (withadjustable height). Standard nozzle for 10-20 cm line. (Linewidth can be ranged from 10 cm to 30 cm by changing nozzle and adjusting gun height. Fixed support can be replaced with pneumatic support. High-pressure paint filter. Automatic glass bead gun. Diffuser with adjustable slope and adjustable opening angles. Closing delay regulator for bead gun. MAX. LINE WIDTH: 90cm (achievable only with proper optional equipment). Electronic spacing device. Diesel engine: power 44 HP, liquid cooling. Lights and LED beacon. Warning board with arrow for left/right car overtaking and 2 flashing. Hydraulic drive with: 2 motors directly coupled on rear wheels, hydraulic negative brakes, control for forward, reverse and neutral gear with engagement of negative brakes, variable-flow pump. Hydraulic oil cooler. Central steering. Central steering allows to easily stripe sharper curves and makes AR300SN optimal to stripe U-bend roads. Steering diameter 6,5m. Seat with adjustable position (left/right; forward/back). Dimensions: 3450x1110x2100mm. Weight: 1300kg. In addition, it is possible to purchase additional equipment. Photos don't represent the standard version of line striper.